Happi Sizing Guide

How to use Laconic Light 2.0

1. Setting Activation Sensitivity Mode Enter Mode: From the OFF state, double-click the bottom button to enter Activation Sensitivity Setting Mode. The LL will become dimly lit. Set Sensitivity: Hit the LL with the desired force to register your preferred activation sensitivity/force. The LL will flash once to confirm. Exit/Save: Hold the bottom button or set aside for 40 seconds to return to the OFF state. 2. Chem Light Mode Enter Mode: From the OFF state, directly hit the stick body (reaching activation threshold) to enter Chem Light Mode. Speed Up Lighting (Optional): Hit or shake the device to make it light up faster. Behavior: Once on, the light will gradually reach peak brightness, then slowly dim and maintain a steady brightness level. Brightness Adjustments: Press bottom button once to switch directly to Gear 1 (Always-on Mode brightness controls). Exit/Power Off: Hold the bottom button or set aside for 40 seconds to return to the OFF state. 3. Always-on Mode & Brightness Gears Enter Mode: From the OFF state, press and hold the bottom button. By default, it will enter Gear 1 (default brightness). Gear Navigation: Press the bottom button once to switch between Gear 1 and Gear 2. Press the bottom button 3 times to enter Breathing Light Standby. Gently hit the LL to enter Gear 3. From Gear 3 press the bottom button once to return to Gear 2. Exit/Power Off: Hold the bottom button or set aside for 2.5 minutes to turn the device off.

Learn more

Happi Care Instructions

Washing Hand Washing (Recommended) Use cold water Only use neutral/mild detergent (if needed) Wash happi coat inside out DO NOT use bleach DO NOT use fabric softener If Machine Washing, place happi coat inside a mesh bag and wash on gentle/delicate cycle. Drying Only air dry away from direct sunlight Dry happi coat inside out Lie flat or use a hanger that keeps arms straightened (available to purchase) DO NOT machine dry. Heat may cause shrinkage and color loss Ironing Use a low temperature to avoid damaging the fabric DO NOT iron directly. Use a pressing cloth or similar in between. DO NOT iron while the happi coat is wet. Doing so can cause shrinkage and damage to the fabric. Storage Happi coat must be stored out of direct sunlight. Use a hanger that keeps arms straightened OR fold the happi coat similar to how it was packaged.

Learn more