How to use Laconic Light 2.0

1. Setting Activation Sensitivity Mode

1. Enter Mode: From the OFF state, double-click the bottom button to enter Activation Sensitivity Setting Mode. The LL will become dimly lit.

2. Set Sensitivity: Hit the LL with the desired force to register your preferred activation sensitivity/force. The LL will flash once to confirm.

3. Exit/Save: Hold the bottom button or set aside for 40 seconds to return to the OFF state.

2. Chem Light Mode

1. Enter Mode: From the OFF state, directly hit the stick body (reaching activation threshold) to enter Chem Light Mode.

2. Speed Up Lighting (Optional): Hit or shake the device to make it light up faster.

3. Behavior: Once on, the light will gradually reach peak brightness, then slowly dim and maintain a steady brightness level.

4. Brightness Adjustments:

   • Press bottom button once to switch directly to Gear 1 (Always-on Mode brightness controls).

5. Exit/Power Off: Hold the bottom button or set aside for 40 seconds to return to the OFF state.

3. Always-on Mode & Brightness Gears

1. Enter Mode: From the OFF state, press and hold the bottom button. By default, it will enter Gear 1 (default brightness).

2. Gear Navigation:

   • Press the bottom button once to switch between Gear 1 and Gear 2.

   • Press the bottom button 3 times to enter Breathing Light Standby.

     • Gently hit the LL to enter Gear 3.

     • From Gear 3 press the bottom button once to return to Gear 2.

3. Exit/Power Off: Hold the bottom button or set aside for 2.5 minutes to turn the device off.